DRY-12
CLASS 4 / SPECIALTY
Cold-Weather Winter Pipe Freeze
Affected Envelope: 1,100 SF • 9,900 CF
2 Chambers • 5 Days
Engineering Specification
Winter freeze-break in a vacant residence at 52°F ambient where standard LGR efficiency drops, requiring desiccant or supplemental heat-assisted drying.
AFFECTED SF
1,100 SF
CHAMBER VOL
9,900 CF
TARGET GPP
30 gr/lb
DRYING DAYS
5 Days
Included Zones & Base Parameters
| Chamber / Zone | L × W | Ceiling | Floor SF | Volume CF | Equipment / Target |
|---|---|---|---|---|---|
| Main Level Living & Kitchen | 35′×20′ | 9′ | 700 | 6,300 | 8 Air Movers (64°F / 34% RH) |
| Exterior Wall Pipe Chase | 40′×10′ | 9′ | 400 | 3,600 | 4 Air Movers (62°F / 35% RH) |
| Total (2 Chambers) | — | — | 1,100 SF | 9,900 CF | 12 Air • 1 Desiccant |
IICRC S500 Standards Applied
- ✓Low-Temp Desiccant Justification: F9 note proves why <65°F ambient requires desiccant/heat vs. standard refrigerant LGR.
- ✓30 GPP Target Depression: Maintains aggressive vapor pressure differential even in cold structural framing.
- ✓Carrier Audit Defense: Documents ambient temp logs and thermal imaging to defeat equipment-downgrade audits.
DRYFLEX™ ENGINE
Run S500 Audit & F9 Notes
Load this baseline scenario into DryFlex™ or request early access to customize with your job logs.
Output Bundle:.pdf • .csv • F9 Note
Generation Speed:< 30 Seconds
Carrier Audit:100% Defensible
FREE SAMPLE PACKET
Get Clean-Room Sample Packet
Enter your work email and we will send this sample packet directly to your inbox (1 template per request).