ClaimBridge Suite™ Request Beta Access
DRYFLEX™: OverviewTemplates (12)How It WorksPricingDocsBeta Signup →
← Back to DryFlex™ Templates (12)
DRY-11 CLASS 4 / SPECIALTY

Attic & Roof-Leak Decking Dry-Out

Affected Envelope: 1,120 SF • 7,680 CF 2 Chambers • 4 Days
Engineering Specification

Storm roof-flashing failure saturating attic OSB decking, truss webs, and ceiling drywall below requiring wet-insulation extraction and attic airflow.

AFFECTED SF
1,120 SF
CHAMBER VOL
7,680 CF
TARGET GPP
64 gr/lb
DRYING DAYS
4 Days
Included Zones & Base Parameters
Chamber / ZoneL × WCeilingFloor SFVolume CFEquipment / Target
Attic Truss & Decking Bay40′×20′6′8004,8005 Air Movers (82°F / 39% RH)
Below-Ceiling Drywall Zone20′×16′9′3202,8803 Air Movers (75°F / 41% RH)
Total (2 Chambers)——1,120 SF7,680 CF8 Air • 1 LGR
IICRC S500 Standards Applied
  • ✓Attic Vapor Pressure Math: Accounts for elevated 82°F attic temperatures when sizing dehumidifier grain depression.
  • ✓Insulation Extraction Proof: Documents wet R-38 cellulose/fiberglass removal before sheathing dry-out.
  • ✓Downstream Handoff: Pairs with SketchFlex™ ROOF-* templates for exterior/interior supplement alignment.
DRYFLEX™ ENGINE

Run S500 Audit & F9 Notes

Load this baseline scenario into DryFlex™ or request early access to customize with your job logs.

Output Bundle:.pdf • .csv • F9 Note
Generation Speed:< 30 Seconds
Carrier Audit:100% Defensible
REQUEST EARLY ACCESS →