DRY-09
CAT 1 / CAT 2
Slab-on-Grade Capillary Wick-Up
Affected Envelope: 540 SF • 4,860 CF
2 Chambers • 4 Days
Engineering Specification
Slab-on-grade moisture migration along exterior sill plates and carpet tack strips requiring perimeter tenting and controlled evaporation.
AFFECTED SF
540 SF
CHAMBER VOL
4,860 CF
TARGET GPP
56 gr/lb
DRYING DAYS
4 Days
Included Zones & Base Parameters
| Chamber / Zone | L × W | Ceiling | Floor SF | Volume CF | Equipment / Target |
|---|---|---|---|---|---|
| Main Slab Living Zone | 24′×15′ | 9′ | 360 | 3,240 | 5 Air Movers (76°F / 42% RH) |
| Perimeter Hall & Bedroom | 18′×10′ | 9′ | 180 | 1,620 | 3 Air Movers (76°F / 41% RH) |
| Total (2 Chambers) | — | — | 540 SF | 4,860 CF | 8 Air • 1 LGR |
IICRC S500 Standards Applied
- ✓Concrete Slab Vapor Proof: Tracks relative humidity / Tramex concrete readings alongside drywall sill wicking.
- ✓IICRC S500 Perimeter Math: Justifies 8 air movers spaced at 12–14 LF along wet perimeter walls.
- ✓Copy-Ready F9 Notes: Includes tack-strip disposal and antimicrobial slab treatment justification.
DRYFLEX™ ENGINE
Run S500 Audit & F9 Notes
Load this baseline scenario into DryFlex™ or request early access to customize with your job logs.
Output Bundle:.pdf • .csv • F9 Note
Generation Speed:< 30 Seconds
Carrier Audit:100% Defensible
FREE SAMPLE PACKET
Get Clean-Room Sample Packet
Enter your work email and we will send this sample packet directly to your inbox (1 template per request).