DRY-07
CLASS 4 / SPECIALTY
Hardwood Floor Mat-Drying Injection
Affected Envelope: 360 SF • 3,240 CF
1 Chambers • 6 Days
Engineering Specification
Class 4 specialty hardwood salvage protocol using rescue-mat vacuum panels to pull trapped subfloor moisture and eliminate cupping without full plank replacement.
AFFECTED SF
360 SF
CHAMBER VOL
3,240 CF
TARGET GPP
50 gr/lb
DRYING DAYS
6 Days
Included Zones & Base Parameters
| Chamber / Zone | L × W | Ceiling | Floor SF | Volume CF | Equipment / Target |
|---|---|---|---|---|---|
| Solid Oak Foyer & Living | 24′×15′ | 9′ | 360 | 3,240 | 4 Air + 6 Mats (78°F / 35% RH) |
| Total (1 Chambers) | — | — | 360 SF | 3,240 CF | 4 Air • 1 LGR + Mat System |
IICRC S500 Standards Applied
- ✓Rescue-Mat Cost Avoidance: F9 note compares 6-day mat salvage cost vs. full $14k+ hardwood demo/refinish.
- ✓Subfloor-to-Plank Differential: Tracks top-surface vs. bottom-cupping %MC against 8% wood equilibrium standard.
- ✓Carrier Audit Defense: Daily thermal/pin-meter readings justify specialty mat-system line items.
DRYFLEX™ ENGINE
Run S500 Audit & F9 Notes
Load this baseline scenario into DryFlex™ or request early access to customize with your job logs.
Output Bundle:.pdf • .csv • F9 Note
Generation Speed:< 30 Seconds
Carrier Audit:100% Defensible
FREE SAMPLE PACKET
Get Clean-Room Sample Packet
Enter your work email and we will send this sample packet directly to your inbox (1 template per request).