SPEC-02
SPECIALTY / STRUCTURAL
Residential Hydraulic Elevator Shaft & Pit
Base Footprint: 8.0′ × 8.0′ (192 SF • 1,664 CF)
22 CAD Lines • 3 Zones
Engineering Specification
Structural masonry residential hydraulic elevator shaft (8′ × 8′, 26′ vertical height) with 48″ pit depression, 2-stop landing doors, and overhead machine room.
FOOTPRINT
8.0′ × 8.0′
FLOOR AREA
192 SF
VOLUME
1,664 CF
MAX CEILING
18′
Included Zones & Base Dimensions
| Zone / Room | L × W | Ceiling | Floor SF | Net Wall SF | Volume CF |
|---|---|---|---|---|---|
| Lower 48″ Elevator Pit | 8′×8′ | 4′ | 64 | 128 | 256 |
| 2-Story Hoistway Shaft | 8′×8′ | 18′ | 64 | 534 | 1,152 |
| Overhead Machine Penthouse | 8′×8′ | 4′ | 64 | 107 | 256 |
| Total (3 Zones) | — | Max 18′ | 192 SF | 769 SF | 1,664 CF |
TrueGeometry™ Standards Applied
- ✓Sub-Grade Pit Depression: 48″ concrete pit well isolated from upper hoistway for sump/water-loss scoping.
- ✓Landing Door Deductions: Two 3′×7′ hoistway landing doors (42 SF) deducted from shaft Net Wall SF.
- ✓Downstream Handoff: Exports vertical shaft geometry to Xactimate®, Symbility®, and DryFlex™.
PARAMETRIC STUDIO
Scale & Export Sketch
Configure dimensions to match your laser tape measurements or download the clean-room sample packet.
Universal Bundle:.skx • .sym • .dxf • .pdf • .csv
Generation Speed:< 30 Seconds
Carrier Audit:100% Defensible